Wednesday, November 13, 2019
Insulation :: essays research papers fc
 Insulation      Introduction         The experimenter is testing on denim, cotton T-shirt material, wool  fabric, thermal underwear, polyester fabric, and a Ziplock bag with no insulator.  From research the experimenter learned that wool is a fine soft wavy hair that  forms all or part of the protective coat of a sheep. Since ancient times it was  harvested to provide clothing and is an important part in textile trade because  of its insulation. Woolen fabric is when the woolen system uses short or mixed  long and short fiber where no combing is done. It has a rough appearance and is  most suitable for blankets, overcoats, and tweeds. Denim which the experimenter  is also testing is the material used to make blue jeans and is currently one of  the world's most popular fabrics. It is fairly heavy and is made with a blue  cotton warp and a white cotton filling (Groilers, 1996). The thermal underwear  is duofold, with an outer layer made of 65% cotton, 25% wool, and 10% nylon, and  an inner layer made of 100% cotton.       It's the winter again and the weather is becoming colder. Each morning  many people wonder what to wear to stay as warm as possible, but they aren't  sure which material will keep them warmest. The experiment was chosen to see  which clothing insulator retains the most heat. "Insulation is material that  protects against heat, cold, electricity, or sound." (Science Encyclopedia,  1984). In this case the insulation will be protecting against a cold temperature.         The hypothesis is if denim, cotton T-shirt material, wool fabric,  polyester fabric, thermal underwear, and a Ziplock bag with out insulating  material are tested to see which one retains the most heat, then wool fabric  will retain the most heat because it holds an important place in today's textile  trade because of its good insulation and the fact that it comes from the  protective coat of sheep who need to stay warm and use that as their insulator.    Procedure    The first thing the experimenter does is fill the inside of five, gallon-sized  Ziplock bags with the insulation material so it is one centimeters thick all  around. Leave the sixth Ziplock bag empty because it will serve as the control  group. Then fasten the insulating materials to the inside of the gallon sized  Ziplock bag with adhesive tape.       Next the experimenter boils ten pints of tap water and let it cool until  (using the candy thermometer) the temperature drops to 49 degrees Celsius. Then  immediately fill each of the six canning jars with equal amounts of the water.  Immediately after that drop a regular thermometer into each jar, and cap it    					    
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.